FTX-P1
-
Catalogue number:
-
40202098
Photoelectric smoke detector
Filtrex smoke detector is intended for use in normal environmental conditions, where dust and other airborne particulate are present at elevated levels. These elevated levels tend to cause false alarms and high maintenance in standard detectors. Filtrex provides a protective enclosure for a photoelectric smoke detector chamber and allows smoke detection in areas that tended to use exclusively heat detection.
Specifications
- Operating Voltage Range: 15 to 32 VDC
- Detector Current:
250 µA @ 24 VDC (without communication)
360 µA @ 24 VDC (one communication every 99 communications with LED enabled)
- Auxiliary Power Supply Voltage: 15 to 30 VDC filtered; Ripple voltage may not drop below 15 volts.
- Auxiliary Power Supply Current:Peak: 123 mA max.
Average: 27 mA max.
- Operating Humidity Range: 10% to 93% Relative Humidity, noncondensing
- Operating Temperature Range: 0°C to 50°C (32°F to 122°F)
- Height: 2.8 inches (43 mm)
- Diameter:
6.1 inches (155 mm) installed in B501B-FTX
4.0 inches (102 mm) installed in B524FTXE
- Weight: 7.3 oz. (207 g)
Back to «Addressable Fire Detectors»
Compatible products:
IRIS - Addessable Fire Control Panel
Support: